With the application setting Refrigeration & Air Conditioning (AC) the capacity data of the compressor are related to the evaporator (cooling capacity).
With the heat pump application function the capacity data of the compressors are related to the condenser (heat capacity).
Power consumption of condenser fans included.
Unlimited application range
Supplementary cooling or reduced suction gas temperature (Δtoh<20K)
Air-cooled condensation unit with large-dimensioned condensers, optimised
closed loops and heat transfer in conjunction with high-power fans. These
cost-effective fans with thermal protection shield are well-suited for
electronic speed regulation for an optimal condensation pressure setting.
Semi-hermetic, suction gas-cooled 4-cylinder reciprocating compressor in
compact design. The best possible serviceability is provided by means of a
replaceable drive unit, among other things. The compressor stands out due to its
outstanding running comfort and efficient operating performance. The suction
shut-off valve can be rotated by 90° in each instance. Dependable mechanism
lubrication is guaranteed by means of an oil pump which is independent of
rotating direction, as well as a large-volume oil sump. The optional oil sump
heating is carried out using an immersion sleeve and can therefore be replaced
without intervening in the refrigeration cycle.
An additional connection facility for an oil level regulator is available as
a standard. The electrical connection is simplified by means of a large-volume
electric terminal box. The electronic motor protection MP10 with optical status
indication uses PTC sensors in series to monitor the winding temperature and, if
desired, the discharge gas temperature.
Colour: blue (RAL 5000)
HG P or HG
e semi-hermetic motor compressor (Extent of delivery see compressor)
installed on the unit with anti-vibration pads. The liquid receivers with sight
glass and Rotalock shut-off valve with brazing connection. Tank is provided
(appropriate pressure appliance guideline)
Air-cooled finned tube condenser with 1 ventilator:-
Ventilator 230 V - 1 - 50/60 Hz, with bimetal winding protection, phase control
for speed adjustment (speed regulator not included in scope of supplies)-
With piping on discharge and liquide side. Service charge
4 rubber plates enclosed for installation of the condensing unit
Digital capacity regulator DCR14 230 V - 1 - 50/60
Hz, IP651 digital capacity regulator = 50% residual capacity
Cylinder cover prepared for digital capacity regulator
Oil sump heater110-240 V - 1 - 50/60 Hz, 50-120 W, IP66PTC heater
Thermal protection thermostat
Oil pressure safety switch MP55 230 V - 1 - 50/60 Hz,
Additional fan230 V AC - 1 - 50 Hz, 97 W,
IP44230 V AC - 1 - 60 Hz, 128 W 8)
High pressure safety limiter + controller/ +low pressure
Safety valve for receiver 9)
Oil separator incl. mounting
Waterproof housing 8)
Speed controll for the ventilator 8)
Further accessory parts see compressor