Technical data
HGX44e/390-4 S CO2
| Application | Refrigeration & AC |
| Compressor refrigeration capacity | 62.80 kW |
| Power consumption | 14.60 kW |
| Current draw (400 V) | 30.80 A |
| Mass flow | 0.242 kg/s |
at following operating condition:
| Refrigerant | R744 |
| Reference temperature | DewPoint |
| Evaporating temperature | -35.0 °C |
| Condensing temperature | -5.0 °C |
| Supply frequency | 50 Hz |
| Voltage | 400 V |
| Suction gas superheat | 10 K |
| Subcooling (outside cond.) | 0 K |
| Number of cylinders / Bore / Stroke | 4 / 50 mm / 50 mm |
| Displacement 50/60 Hz (1450/1740 ¹/min) | 34,20 / 41,00 m³/h |
| Voltage 1) | 380-420V Y/YY -3- 50Hz PW |
| 440-480V Y/YY -3- 60Hz PW |
| Winding divided into | 50% / 50% |
| Max. working current 2) | 41.6 A |
| Max. power consumption 2) | 23.5 kW |
| Starting current (rotor blocked) 2) | 170.0 / 275.0 A |
| Motor protection | INT69 G |
| Protection terminal box | IP 65 |
| Weight | 203 kg |
| Frequency range 3) | 25 - 70 Hz |
| Max. permissible overpressure (g) (LP/HP) 4) | 30 / 55 bar |
| Connection suction line SV | 35 mm - 1 3/8 " |
| Connection discharge line DV | 28 mm - 1 1/8 " |
| Lubrication | Oil pump |
| Oil type R744 | BOCKlub E85 |
| Oil charge | 2,9 Ltr. |
| Oil sump heater | 230 V - 1 - 50/60 Hz, 160 W |
| Dimensions
Length / Width / Height | 701 / 361 / 407 mm |
| Sound power level LWA 5) | 74 db(A) @ -35 °C / -5 °C / 10 K |
| 79 db(A) @ -35 °C / 15 °C / 10 K |
| Sound pressure level LpA 5) | 61 db(A) @ -35 °C / -5 °C / 10 K |
| 65 db(A) @ -35 °C / 15 °C / 10 K |
Scope of supply
Semi-hermetic four-cylinder reciprocating compressor
with drive motor
Single-section compressor housing with hermetically integrated electric motor
Rear bearing flange prepared for oil differential pressure
sensor DELTA-P II
Winding protection with PTC resistor sensors and
electronic trigger unit INT69 G
115-230 V AC, 50/60 Hz,
IP00
Oil pump
Pressure relief valve suction and discharge line
Possibility of
connection of oil level controllers ESK, AC+R or CARLY
Possibility of connection of oil level controllers Traxoil 6)
Oil charge:
BOCKlub E85
Sight glass
Internal pressure relief valve
Connection piece suction and discharge line valve in
soldering / welding design
Suction and discharge line valve
Intermediate adapter for discharge line
valve
Inert gas charge
Accessories
Oil sump heater 230 V - 1 - 50/60 Hz, 160
W
USB converter for INT69 G Diagnose 7)
Oil differential pressure sensor DELTA-P II 220-240 V -
1 - 50/60 Hz 8)
Thermal protection thermostat per cylinder cover
Oil temperature sensor (Pt1000, for external evaluation)
7)
INT69 G Diagnose 115-230 V AC, 50/60 Hz, IP00 (INT69 G
not applicable)
DP-Modbus Gateway 115-230 V AC, 50/60 Hz, IP00 including
adapter cable 7)
Modbus-LAN Gateway 230 V AC, 50/60 Hz,
IP00 7)
Additional fan
230 V AC - 1 - 50 Hz, 97 W,
IP44
230 V AC - 1 - 60 Hz, 128 W 7)
Oil level regulator Danfoss COM20C - 230 V AC 50 Hz, PS (MWP) 130 bar, MOPD 80 bar (100 bar) 9)
4 anti-vibration pads enclosed
Special voltage and/or frequency (on request)
Notes
| 1) | Tolerance (± 10%)
relates to the mean value of the voltage range. Other voltages and current types
on request
All data are based on voltage rms values
PW = part
winding, motors for part winding starting
(no start unloaders required)
Designs for Y/D on request |
| 2) | - The stated value for the max. power consumption is valid
for the adjusted power supply.
- Starting current (rotor blocked):
- Part winding (PW) motors: Winding 1 / Winding 1+2
- Delta/Star (Δ/Y) motors: Δ / Y
- Take account of the max.
operating current / max. power consumption for designing motor contractors, feed
lines, fuses and motor protection switches. Motor contractors: Consumption
category AC3. |
| 3) | The maximum permissible working current of the compressor
(Imax) must not be exceeded. Take account of the guidelines for use of frequency
inverter (see compressor assembly instruction or selection software).
|
| 4) | LP = Low
pressure
HP = High pressure |
| 5) | Declared dual-number noise emission values are in
accordance with ISO 4871. The corresponding uncertainty to the sound power level
is KWA = 2,5 dB and to the sound pressure level is KpA =
2,5 dB. The values are valid for 50 Hz with the refrigerant R744 at the standard
rating points according to EN 12900.
- A-weighted sound power level LWA (re 1 pW), in decibel. To
determine the values, measurement methods of the ISO 3740 standard with
accuracy class 2 or higher were used.
- A-weighted sound pressure level LpA (re 20 µPa), in decibel.
The values are calculated from the sound power level in accordance with ISO
11203: LpA = LWA - Q2 at a distance of d = 1m
to the reference box.
|
| 6) | Only with additional
adapter possible |
| 7) | Enclosure |
| 8) | Enclosure (screw-in part mounted) |
| 9) | electrically wired in the terminal box (standard)
without cable (option) |