Technical data
HAX44e/565-4
| Application | Refrigeration & AC |
| Compressor refrigeration capacity | 8.77 kW |
| Power consumption | 5.83 kW |
| Current draw (400 V) | 14.30 A |
| Mass flow | 0.066 kg/s |
at following operating condition:
| Refrigerant | R404A, R507 |
| Reference temperature | Dew point |
| Evaporating temperature | -35.0 °C |
| Condensing temperature | 40.0 °C |
| Supply frequency | 50 Hz |
| Voltage | 400 V |
| Suction gas temperature | 20 °C |
| Subcooling (outside cond.) | 0 K |
| Number of cylinders / Bore / Stroke | 4 / 60 mm / 50 mm |
| Displacement 50/60 Hz (1450/1740 ¹/min) | 49,20 / 59,00 m³/h |
| Voltage 1) | 380-420V Y/YY -3- 50Hz PW |
| 440-480V Y/YY -3- 60Hz PW |
| Winding divided into | 50% / 50% |
| Max. working current 2) | 18.3 A |
| Max. power consumption 2) | 9.4 kW |
| Starting current (rotor blocked) 2) | 101.0 / 174.0 A |
| Motor protection | INT69 G |
| Protection terminal box / HA-fan | IP 66 / IP 44 |
| Voltage HA-fan | 230 V - 1 - 50/60 Hz, 140 W |
| Protection terminal box | IP 66 |
| Weight | 178 kg |
| Max. permissible overpressure (g) (LP/HP) 3) | 19 / 28 bar |
| Connection suction line SV | 35 mm - 1 3/8 " |
| Connection discharge line DV | 28 mm - 1 1/8 " |
| Lubrication | Oil pump |
| Oil type R134a, R404A, R407A/C/F, R448A, R449A, R450A, R513A | FUCHS Reniso Triton SE 55 |
| Oil type R22 | FUCHS Reniso SP 46 |
| Oil charge | 2,7 Ltr. |
| Oil sump heater | 230 V - 1 - 50/60 Hz, 160 W |
| Dimensions
Length / Width / Height | 717 / 361 / 408 mm |
| Sound power level LWA 4) | 82 db(A) @ -35 °C / +40 °C |
| Sound pressure level LpA 4) | 68 dB(A) @ -35 °C / +40 °C |
Scope of supply
Semi-hermetic four-cylinder reciprocating compressor
with drive motor for part winding start
380-420 V Y/YY - 3 - 50 Hz
440-480
V Y/YY - 3 - 60 Hz
Single-section compressor housing with hermetically
integrated electric motor
Oil pump
Motor is cooled by an integrated ventilator with air
deflection hood.
230 V - 1 - 50/60 Hz, IP44, 140 W, 0,71 A
Winding protection with PTC resistor sensors and
electronic trigger unit INT69 G
115-230 V AC, 50/60 Hz,
IP00
Possibility of
connection of oil level controllers ESK, AC+R or CARLY
Possibility of connection of oil level controllers Traxoil 5)
Possibility for connection of oil pressure safety switch
MP54
Oil charge:
HA: FUCHS Reniso SP 46
HAX: FUCHS Reniso Triton SE 55
Sight glass
Rear bearing flange prepared for oil differential pressure
sensor DELTA-P II
Pressure relief valve
Suction and discharge line valve
Inert gas charge
4 anti-vibration pads enclosed
Accessories
Start unloader by means of a ESS (Electronic Soft
Start), 400 V - 3 - 50/60 Hz, IP20 (Connection clamps IP00) for installation in
switch cabinet 6)
Digital capacity regulator DCR14 230 V - 1 - 50/60
Hz, IP65
1 digital capacity regulator = 50% residual capacity 7)
Cylinder cover prepared for digital capacity
regulator
Oil sump heater
230 V - 1 - 50/60 Hz, 160 W,
IP66
PTC heater self-regulating
Oil pressure safety switch MP54 230 V - 1 - 50/60 Hz,
IP20 6)
Oil differential pressure sensor DELTA-P II 220-240 V -
1 - 50/60 Hz 8)
Thermal protection thermostat per cylinder cover
7)
Connection piece suction and discharge valve in welding
design 9)
USB converter for INT69 G Diagnose 6)
Oil temperature sensor (Pt1000, for external evaluation)
7)
INT69 G Diagnose 115-230 V AC, 50/60 Hz, IP00 (INT69 G
not applicable)
DP-Modbus Gateway 115-230 V AC, 50/60 Hz, IP00 including
adapter cable 6)
Modbus-LAN Gateway 230 V AC, 50/60 Hz,
IP00 6)
Intermediate flange for suction valve on right
seen from oil pump in conjunction with capacity regulator 6)
Step protection
Special voltage and/or frequency (on request)
Notes
| 1) | Tolerance (± 10%)
relates to the mean value of the voltage range. Other voltages and current types
on request
All data are based on voltage rms values
PW = part
winding, motors for part winding starting
(no start unloaders required)
Designs for Y/D on request |
| 2) | - The stated value for the max. power consumption is valid
for the adjusted power supply.
- Starting current (rotor blocked):
- Part winding (PW) motors: Winding 1 / Winding 1+2
- Delta/Star (Δ/Y) motors: Δ / Y
- Take account of the max.
operating current / max. power consumption for designing fuses, supply lines and
safety devices. Fuse: Consumption category AC3. |
| 3) | LP = Low
pressure
HP = High pressure |
| 4) | Declared dual-number noise emission values are in
accordance with ISO 4871. The corresponding uncertainty to the sound power level
is KWA = 2,5 dB and to the sound pressure level is KpA =
2,5 dB. The values are valid for 50 Hz with the refrigerant R404A at the
standard rating points according to EN 12900.
- A-weighted sound power level LWA (re 1 pW), in decibel. To
determine the values, measurement methods of the ISO 3740 standard with
accuracy class 2 or higher were used .
- A-weighted sound pressure level LpA (re 20 µPa), in decibel.
The values are calculated from the sound power level in accordance with ISO
11203: LpA = LWA - Q2 at a distance of d = 1m
to the reference box.
|
| 5) | Only with additional
adapter possible |
| 6) | Enclosure |
| 7) | Mounted |
| 8) | Enclosure (screw-in part mounted) |
| 9) | On request |