Semi-hermetic, suction gas-cooled 4-cylinder reciprocating compressor in compact design. The best possible serviceability is provided by means of a replaceable drive unit, among other things. The compressor stands out due to its outstanding running comfort and efficient operating performance. The suction shut-off valve can be rotated by 90° in each instance. Dependable mechanism lubrication is guaranteed by means of an oil pump which is independent of rotating direction, as well as a large-volume oil sump. The optional oil sump heating is using an immersion sleeve and can therefore be replaced without intervening in the refrigeration cycle.

An additional connection facility for an oil level regulator is available as a standard. The electrical connection is simplified by means of a large-volume electric terminal box. The electronic motor protection MP10 with optical status indication uses PTC sensors in series to monitor the winding temperature and, if desired, the discharge gas temperature.

Colour: blue (RAL 5000)

Technical data

Scope of supply

Semi-hermetic four-cylinder reciprocating compressor with drive motor
Motor unit flanged onto the compressor housing

Oil pump

Possibility of connection of oil level controllers ESK, AC+R or CARLY

Winding protection with PTC resistor sensors and electronic trigger unit MP 10

Oil pump cover with screw-in option for oil differential pressure sensor DELTA-P II

Possibility of connection of oil level controllers Traxoil ⁴⁾

Possibility for connection of oil pressure safety switch MP54

Oil charge:
HG: BOCKlub A46
HGX: BOCKlub E55

Sight glass

Prepared for capacity regulator (1 cylinder cover)

Pressure relief valve

Suction and discharge line valve

Inert gas charge

4 anti-vibration pads enclosed

Accessories

Start unloader 230 V - 1 - 50/60 Hz, IP65, less check valve,
including thermal protection thermostat (posistor tracer)

Start unloader by means of a ESS (Electronic Soft Start), 400 V - 3 - 50/60 Hz, IP20 (Connection clamps IP00) for installation in switch cabinet ⁵⁾

Capacity regulator 230 V - 1 - 50/60 Hz, IP65
1 capacity regulator = 50% residual capacity

Oil sump heater 230 V - 1 - 50/60 Hz, 140 W

Oil service valve

Oil pressure safety switch MP54 230 V - 1 - 50/60 Hz, IP20 ⁵⁾

Water-cooled cylinder covers

Oil differential pressure sensor DELTA-P II 220-240 V - 1 - 50/60 Hz ⁵⁾

Connection piece suction and discharge valve in welding design

Thermal protection thermostat per cylinder cover ⁶⁾

Bock Compressor Management BCM2000 including oil pressure control,
oil temperature control (NTC), thermal protection thermostat per cylinder couvers

Additional fan
230 V AC - 1 - 50 Hz, 97 W, IP44
230 V AC - 1 - 60 Hz, 128 W ⁵⁾

Intermediate adapter for discharge line valve

Special voltage and/or frequency (on request)

Notes