Semi-hermetic suction gas-cooled reciprocating compressor in compact design of machine category 2 according to directive 2014/34/EU. Intended for use in refrigeration systems inside explosion-endangered areas of the zone 1 and 2 (according to ATEX Directive 1999/92/EG). The compressor complies with the following ATEX classification according to the EC type examination certificate:

• Standard painting: II 2G IIC T3 Gb (compressor with conductive coating)
• Offhsore painting: II 2G IIB T3 Gb (compressor with insulating coating)

The compressor stands out due to its outstanding running comfort and efficient operating performance. Dependable mechanism lubrication is guaranteed by means of an oil pump which is independent of rotating direction, as well as a large-volume oil sump.

As standard an electronic trigger unit is monitoring the motor temperature via PTC sensors and each cylinder cover via special thermal heat protection thermostats concerning the discharge end temperature. The electronic trigger unit is supplied separately for installation in the switchboard (outside the EX zone). The thermal heat protection thermostats are connected to the trigger unit via an included safety barrier (which also has to be installed outside the EX zone) and therefore they are integrated into an intrinsically safe electrical circuit.

Color: blue (conductive coating RAL 5007, insulating coating: RAL 5000)

Technical data

Scope of supply

Semi-hermetic four-cylinder reciprocating compressor with drive motor
Motor unit flanged onto the compressor housing

Oil pump

Possibility of connection of oil level controllers ESK, AC+R or CARLY ⁴⁾

Winding protection with PTC resistor sensors. Electronic triggering unit MP 10 to be fitted in switch cupboard (enclosed)

2-channel safety barrier as energy limiting device in self secure circuit in order to prevent firing through sparks or thermic effects,
for fitting into switch cabinet (enclosed)

Oil pump cover with screw-in option for oil differential pressure sensor INT250 EX  ⁴⁾

Possibility of connection of oil level controllers Traxoil ⁵⁾

Oil charge:
HG: FUCHS Reniso SP 46
HGX: FUCHS Reniso Triton SE 55
HG HC: FUCHS Reniso SYNTH 68

Sight glass

Pressure relief valve

Suction and discharge line valve

Thermal protective thermostat for each cylinder head

Inert gas charge

4 anti-vibration pads enclosed

Accessories

Capacity regulator 230 V - 1 - 50/60 Hz, IP66
1 capacity regulator = 50% residual capacity,
explosion-proof, equipment category 2 as per directive 2014/34/EU

Oil sump heater 230 V - 1 - 50/60 Hz, 140 W,
explosion-proof, equipment category 2 as per directive 2014/34/EU ⁶⁾

Oil differential pressure sensor INT250 Ex,
explosion-proof, equipment category 2 as per directive 2014/34/EU ⁶⁾

Special painting Offshore (Compressor with insulating surface coating)

Special voltage and/or frequency (on request)

No further accessories possible

Notes